Go Racing with the MRA for only $100 - SUPERSTREET!

Jim 'smooth' Brewer · expert

SuperStreet racing with the MRA

GO HERE TO REGISTER FOR SUPERSTREET!

www.mra-racing.org/memberportal
**If you do not have a username and password set up yet, please email Jim Wilson at mraracer29@gmail.com

Instuctions - http://filezilla.mra-racing.org/files/2013_MRA_New_License_Instructions.pdf

For the few of us with the ultimate need for speed, nothing can replace the exhilaration and challenge track racing can provide. Motorcycle roadracing is one of those rare sports that can humble the "fastest street rider" in no time. The racetrack is the ultimate arbitrator of who is truly the fastest motorcyclist by rewarding a rider’s own skills and abilities without the annoying distractions and dangers public roads present.

The MRA designed the SuperStreet class for motorcycle enthusiasts who are not licensed roadracers, but who’d like to experience motorcycle roadracing on a real racetrack without the substantial investment in bike preparation and transportation equipment that club level racing typically requires.

Different from a track day, you will participate in an actual race against the other riders in your class where you will use race strategies & passing tactics in competing for single goal of getting to the finish line first.

So, you want to try motorcycle roadracing on a real racetrack? Here’s how to do it.

Overview
The Superstreet class is held on Saturdays in conjunction with MRA race events. It includes a classroom session to discuss racetrack procedures, motorcycle preparation, and race craft tactics specific for motorcycle roadracing.

After the classroom, you’ll go through a quick tech inspection, then you’ll be paired up with a race instructor who will guide you through some basic on-track racing drills and make tailored suggestions to help you go faster. The on-track sessions will be interleaved with MRA races so you’ll be able to take a breather, make bike adjustments, chat with the instructors, or watch the MRA’s Saturday sprint and endurance races.

The grand finale of the day will be the SuperStreet sprint race where you’ll be assigned a grid spot, given the green light, and compete in a full length multi-lap race against the SuperStreet field in a no-limits contest to the finish line.

2013 SuperStreet Race Schedule
Round 1. May 11th, 2013 @ High Plains Raceway
Round 2. No superstreet due to 4 hour endurance race
Round 3. June 29th @Pueblo Motorsports Park
Round 4. July 20th@ Pikes Peak International Raceway
Round 5. August 10th@ High Plains Raceway
Round 6. August 24th@ High Plains Raceway
Round 7. September 14th @ Pikes Peak International Raceway

SuperStreet Raceday Schedule
11:00am – Arrive at the track, perform any pit / equipment setup as you need. You should have all of your equipment ready to go through tech & get on the track prior to the start of the registration/classroom session at noon.
Noon – Classroom registration and instruction begins. Don’t be late!
1:00pm – Classroom session ends, begin SuperStreet tech inspection
1:30pm – pair up with instructors, start the on-track drills and instruction sessions
The rest of the day will alternate with on-track and off track instruction sessions finalizing with the SuperStreet sprint race.

Cost
$100 for SuperStreet event day, including classroom, on-track instruction, and final sprint race.

Registration
You should register on-line at (coming soon!)
to make sure you are reserved a spot for the event you choose.

Motorcycle rules & preparation
For SuperStreet, your current bike should be in good working order. Roadracing puts MUCH more stress on your motorcycle compared to "canyon carving" - and you should make sure your bike is good shape with good tires, properly adjusted steering head bearings, etc. For the SuperStreet event, you are not required to "safety wire" any parts, but are required to tape up your lights and mirrors. All controls and wearing parts should be in superb working order.

It is very important that you DO NOT have glycol based coolant in your cooling system. If your bike boils over or spills glycol on the track, it is impossible to clean up so you will ruin everyone's day. See the rule & prep detail next for what is allowed.

Rule and Prep Details
a) There are no displacement, modifications or engine configuration limits for SuperStreet racing.
b) Coolant: only water, Red Line Water Wetter, Royal Purple Ice (NOT Engine Ice or Evans coolant), or Silkolene Pro CCA coolant additives are allowed in liquid cooled motorcycles. Glycol based substances are prohibited.
c) Neat and clean. Motorcycles that are dirty or show potentially dangerous bodywork damage will not be approved.
d) Tires must be in good condition and may not be re-caps. Valve caps must be installed. Tread must be at least 50%.
e) All motorcycles must have operational front and rear brakes, with at least 50% pad or lining thickness.
f) All motorcycles must have an operational handlebar-mounted kill switch or button.
g) All motorcycles must have a self-closing throttle.
h) All lights and blinkers must be taped or removed. Brake and taillights must be disconnected. Side mirrors must be removed.
i) Side stands can remain on bike but must have good working return spring.
j) Silicone brake fluid is not allowed (DOT 5 Brake Fluid).
k) An MRA provided decal will be displayed on both sides of the bike at least axle line high or higher.
l) All machines will be left to VP of Rules and Tech final approval.
n) Full protective leather gear. This includes a high quality Snell rated helmet, leather jacket, pants, and high quality gloves and boots. Roadracing is a serious sport so you should always make safety your first concern. Details on required rider equipment is available in the MRA on-line rulebook in section 5.1 Rider Equipment.
o) All riders must conform to and have an understanding of race procedures detailed in Sections 8, 9, 10 and 11 of the rulebook.
p) The rider bears the responsibility of presenting a motorcycle in conformance with all requirements.
q) All motorcycles and rider equipment must pass MRA technical inspection before participating in any practice session, race or school.
r) The burden of complying with the rules regarding class suitability and technical requirements rests with the entrant. It is his/her responsibility to seek approval of the VP or Rules & Tech of any areas in question.
s) The VP of Rules & Tech or any MRA official reserves the right to inspect any race motorcycle or rider apparel or equipment at any time during race day for compliance to MRA technical standards and may revoke the Technical Inspection Approval Sticker of any motorcycle at any time during the race day.
t) Any motorcycle or rider involved in a crash must be re-inspected by a MRA tech inspector. Damage that in any way endangers rider safety must be repaired prior to starting or continuing any further practice or competition.

Quick SuperStreet raceday checklist
Bike:
• Mirrors and lights taped up
• Enough fuel for the event
• Correct tire pressures – bring tire air pressure gauge
Rider:
• Helmet
• Leathers(1pc. or 2pc. that zip all the way around)
• Back protector
• Leather Gloves
• Boots
• Pens/Paper to make notes if you want
• Friend to help you on the track day if you want

Further info
The MRA Forums http://forums.mra-racing.org/ for New Racer info are great places to start looking for details or ask specific questions.
The MRA rulebook http://www.mra-racing.org/index.cfm?action=rulebook has all the nitty-gritty about racing rules & procedures.
The expert racers of the MRA are generally willing to answer questions, and people such as the MRA New Rider Director Jeff Brown are always willing to help. Feel free to contact Jeff with specific questions regarding the SuperStreet class.
Jeff Brown, #277
MRA New Rider Director
303-210-0425
jeff@12voltracing.com
_________________
MRA #90 - '99, '03. '05 StGTO champ; Big Stick Racing
'08 Ducati 1098R

UglyDogRacing · expert

Updated with 2012 dates.
_________________
MRA #29
2012-13 VP
2010-11 Rider Rep/PR

2012 Sponsors
ABATE of Colorado,Fay Myers Motorcycle World, Dunlop, Performance Friction, Woodcraft,Sidi,Motorex,Renthal,Zero Gravity, Sharkskinz, Leo Vince, XT Racing, APE

Louden · amateur

Updated for 4 hour endurance schedule change
_________________
MRA Rider Rep Public Relations
Sponsors: Eugene Bazyl #502, Mad-Moto, Premier Autosport, Bridgestone

KFinn · expert

UglyDogRacing · expert

iPraetorian · novice

I went to register for the Aug. 25th SS event which says event 5, however there is no event 5 on the pre-entry. There is only a 6, which is for Pikes Peak. On per-entry the numerical order is this, 1,2,3,4,6 (it skips 5) and so on. So is the Aug. 25th at HPR really event number 6 on the pre-entry form?

Thanks!

rybo · expert

Yeah,

Sorry about that - something got screwed up in the code for SS registration this year.

We've just completed Round 5 at HPR, and are now moving to round 6 at HPR.

I just checked out the link and you should be able to sign up for Round 6 (HPR) in the supplied link:

https://www.mra-racing.org/secure/superstreet/

I've edited the first post to better reflect the schedule.

Thanks!

Looking forward to seeing you out there!

Scott
_________________
MRA Expert #69
Sponsored by:
Chicane Instruction
STM Suspension
Speedin' Motorsports
Angry Marmot Motorsports
Sarah, Aaron and David