I am selling my 2009 Kawasaki ZX6R race bike. It has exactly 0 podiums and 0 class championships. Don’t blame the bike. Purchased in 2011 as a street bike with a clear title and bill of sale, I converted it to a race bike that is safety wired, which passes tech inspection in the MRA and CVMA. Over the course of the last five years I continued to modify the bike and swap parts, as shown in the lists below. The engine has a sportbike build and tune ( pump gas and Renegade SX4) that was performed by Imperial Sportbikes in the spring 2016, with only five track days and four race rounds on it. The bike also has a new race wiring harness and race ECU. The interface cable for the race ECU is also included. The suspension (Ohlins TTX shock and 30mm NIX cartridges) was refreshed by STM in spring 2016. The Armor Bodies bodywork was also repaired and repainted in Spring 2016. Last, the transmission cartridge was replaced in the fall 2016 from a used donor motor and a new clutch installed in fall 2015 by Imperial sportbikes.
The bike is ready for track days and racing. It can be seen at Imperial Sportbikes.
Price: $5900
I can be reached at 303-834-5898 or cunning.gary49@gmail.com.
Imperial Sportbikes:
Address: 301 Bryant St, Denver, CO 80219
Phone: 303-573-6600
Link to images https://goo.gl/photos/oKgm3AkU4nYfTj7u8
Bike description:
- Clear title and bill of sale
- Mileage (unknown)
- Safety wired (passes at MRA and CVMA)
- Ohlins TTX shock & 30mm NIX fork cartridges
- Kawasaki race wiring harness, ECU, and interface cable (includes USB-serial converter)
- Leo Vince full Ti SBK race exhaust
- Brembo RCS19 MC
- Galfer superbike wave front rotors and wave rear rotor
- Vortex rear set and V3 gas cap
- Goodridge stainless steel brake lines (front & rear)
- Vesrah SRJL-XX brake pads (great condition)
- Woodcraft clip-ons, frame sliders, case guards, front axle sliders, brake guard, shark fin
- EBC race clutch (1 year old)
- Samco coolant hose kit
- Cox radiator guard
- Block-off plates
- Kyle racing fork cap extenders
- Armour bodies bodywork
- Leatherman seat
- R&G carbon fiber tank sliders
- CRG folding clutch lever
- Motion pro throttle (plus spools)
- Scotts steering stabilizer
- Lightech chain adjusters
- Captive wheel spacers
- 90 degree valve stems
- Supersport engine build by Imperial (spring 2016)
- Replaced seals on front brake calipers (spring 2015)
- Replaced transmission (fall 2016)
- Suspension refreshed by STM (spring 2016)
- New paint and body work repair (spring 2016)
- Shop manual
Additional parts:
- Wind screen
- Stock seat
- Original fork caps for Ohlins 30mm cartridge kit
- (2) Shock springs (rates unknown)
- Fork springs (0.95)
- Stock coolant hoses
- Stock throttle and cable
- (1) Woodcraft frame slider mount
- Stock clutch lever
- Stock clutch cable
- (2) Woodcraft clip on bars
- Numerous small parts