Results 1 to 9 of 9

Thread: Quick shift sensor difference?

  1. #1
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97

    Quick shift sensor difference?

    Does anyone know the difference between the dynojet 4-102 sensor and a 4-114 sensor? I got on ebay and bought a 4-102 sensor and hooked it up to my PCV and no quickshifting.

    Thanks in advance!
    ... itchy... when it bites....

  2. #2
    Member Amateur
    Join Date
    Jun 2012
    Posts
    70
    Looks like one is for the PCIIIUSB and one is for the PCV.
    http://www.powercommander.com/powerc...k_shifter.aspx
    MRA #760

  3. #3
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    Quote Originally Posted by blaircsf View Post
    Looks like one is for the PCIIIUSB and one is for the PCV.
    http://www.powercommander.com/powerc...k_shifter.aspx
    I'm trying to figure out what makes these sensors different from each other, I guess...?
    ... so if I were to splice the PC3 QS sensor and mount the QS sensor to the PCV it should technically work right?
    ... itchy... when it bites....

  4. #4
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    Okay.. I think I found "some" answers to my question.

    "Open" and "Close" loops... I think that's what separates them, right?
    Now to try and figure out if the QS sensor 4-114 is an Open or Close....
    ... itchy... when it bites....

  5. #5
    Member Amateur
    Join Date
    Sep 2015
    Location
    Littleton, CO
    Posts
    81
    doesn't seem to be much life in this forum now that the season is over....

    I have a PCV push sensor you could try and buy if you wanted
    Jared Dear - MRA #48

    Quik Cycles, Sol Performance, Pirelli tires

  6. #6
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    Quote Originally Posted by Redline View Post
    doesn't seem to be much life in this forum now that the season is over....

    I have a PCV push sensor you could try and buy if you wanted
    Yea.... It seems like that... but still was worth shooting out there.

    I might need a pull sensor if the set up I got doesn't work... we'll see what happens tomorrow or Thursday, lol!

    Thanks for chiming in!
    ... itchy... when it bites....

  7. #7
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    I just found out that with a PCV it doesn't matter if it is a open or closed style sensor. You can program it through your PCV to accept what ever style you got.
    I got the QEM understanding that the PCV cannot handle the 8 fuel injectors (which only controls the lower injectors) on my bike so a QEM is needed (to control the upper injectors).

    Life is good... if not better
    ... itchy... when it bites....

  8. #8
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    Quote Originally Posted by Redline View Post
    doesn't seem to be much life in this forum now that the season is over....

    I have a PCV push sensor you could try and buy if you wanted
    I just PM'd you... A friend of mine might be interested in you QS sensor.
    ... itchy... when it bites....

  9. #9
    Member Amateur
    Join Date
    Sep 2015
    Location
    Littleton, CO
    Posts
    81
    sent you a text. let me know
    Jared Dear - MRA #48

    Quik Cycles, Sol Performance, Pirelli tires

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •