Has anybody heard of using Kerosene to clean and lube your chain? A buddy just told me about this and it seems like it would dry it out really bad but always looking for an easier way to clean my chain!
Has anybody heard of using Kerosene to clean and lube your chain? A buddy just told me about this and it seems like it would dry it out really bad but always looking for an easier way to clean my chain!
MRA #406
406 Racing
Michelin
Speedin Motorsports
RockyMtnPhotos
STM Suspension
Custom Collision Repair
420science.com
It's what I use. The manufacturers recommend it.
MRA #29
perfect! Thanks Jim!
MRA #406
406 Racing
Michelin
Speedin Motorsports
RockyMtnPhotos
STM Suspension
Custom Collision Repair
420science.com
There also some very good chain cleaners out there, I like the motorex one myself.
That would work good too I am just thinking that if I can clean it with kerosene all the time and not need to lube it with crap that flings everywhere and makes a mess life would be a lot easier!
MRA #406
406 Racing
Michelin
Speedin Motorsports
RockyMtnPhotos
STM Suspension
Custom Collision Repair
420science.com
Cleaning and lubing are 2 different things... You should still be lubing it regardless of what you use to clean it.
Pete Tabor
MRA #599
--------------------------
Fun Center Cycles
Sol Performance
Speedin' Motorsports
What Pete said -
The kerosene is a solvent and will do a great job of cleaning. You still need to put some kind of lubricant on it afterwards.
I've become a big fan of the Honda HP lube - it goes on wet, but then dries and leaves a thin film of lube that doesn't fling off. I'm sure there are other brands like this too - but I don't know them specifically.
s
MRA Expert #69
Sponsored by: Chicane Instruction
STM Suspension, Speedin' Motorsports
Northern Colorado Euro Motorcycles
Boulder Motorsports, Sol Performance Pirelli
Angry Marmot Motorsports
Sarah, Aaron and David
yeah that was the part that didn't make sense to me! Rybo I'll look up some of the Honda lube and give it a shot! thanks!
MRA #406
406 Racing
Michelin
Speedin Motorsports
RockyMtnPhotos
STM Suspension
Custom Collision Repair
420science.com
I don't use lube of any kind on my chain and prolly never will, chain lube came about when all we had was standard chains which did need lubed but a oring chain retains its lube and no matter what you spray on there will not get to where it needs to go, keep your chain clean are replace it every other year or so depending on how much you ride. Cuts down on the mess a lot so you can acually see what kind of shape the chain is in.
It's an interesting point Bartman -
You certainly work on bikes more than I do, but what I've found is that I actually get the chain to last a couple of years if I lube it and it starts getting kinks in it before then if I don't.
I think what happens with the HP stuff I'm using is that it provides a slick surface between the O-ring and the side plate so it doesn't wear out or get cut and let the grease out before it's time
Just my own personal experience...
MRA Expert #69
Sponsored by: Chicane Instruction
STM Suspension, Speedin' Motorsports
Northern Colorado Euro Motorcycles
Boulder Motorsports, Sol Performance Pirelli
Angry Marmot Motorsports
Sarah, Aaron and David
Agree 100% w/ BARTMAN!!!
AMA #395 / AARONHERSH.COM / SCORPION EXO / Madmoto / MOTOREX / WICKED PHOTOS / GEARZY / Vortex / OGIO / Leo Vince / Galfer / Pilot / MotionPro / Chicken Hawk / ODI Grips
"The faster I go the prettier the girls look" - Nicky Hayden
Clean the chain every couple of rides.
Lube with a quality lube ( I like Chain Wax )
Clean & Lube = longer chain life!
You have to Pay to Play!
Sponsors: My wallet!
MRA #190 nov
Top Dog at Ducati Omaha Service
20+yrs race engine building
DUCATI Specialist
WD-40 has always worked awesome for me. It cleans AND lubes.
WD is what I use as well to clean it but wipe it off as much as possible, very important after a rain race. Don't consider it lube really but my problem is with real chain lubes and the mess they make and how much dirt they attract and that is what kills a chain.
Chain wax is a joke to be honest, may not be a messy as some but does nothing for the chain as far as I can see. Lube is not required between the chain and the sproket only in the pins of the chain and a little on the slider of the swingarm.
X1000 with what Bart's saying. I use nothing but wd40
On street and track and have been since 05. Never ever had a issue and never use lube.
Lube = mangnet for dirt and crap.
and bad things on ColfaxOriginally Posted by R1-2NV
Boulder Motor Sports - RhinoMoto - American Express
Yup I saw that one coming!!
MRA #406
406 Racing
Michelin
Speedin Motorsports
RockyMtnPhotos
STM Suspension
Custom Collision Repair
420science.com
100% agree.... with that and the use of WD...Originally Posted by Munch
Now on Colfax................ a little "Spit" and some "Brownie Batter" goes a long ways :wink: 8)
Jeff Brown, #277
"What can Brown do for you!"
2011-2022 New Rider Director
2008-2010 MRA Rider Representative
Funny Healy! I just saw the Brownie comment coming. I think Jeff Brown has som kind of dynamic search engine on his computer that actively listens in on every conversation any of his friends ever have involving the keyword Colfax.....
Dennis Stowers MRA #151
2021-2023 MRA BoD Rider Representative - Rulebook
Absolute Moto-Michelin
Speedin' Motorsports
Just a comment by a newb.... but lubing the chain should help keep the chain cooler than a non-lube chain. Friction from movement over the sprockets by the chain would cause heat, which translates into expansion of the metal chain or chain lengthening/stretch. Constant heat cycles like in tires, would seem to me be a problem in a chain too and might be more detremental than dirt? Just a theory. Or, maybe the chain really never gets that hot enough for what I described to be possible...not sure.
"I am McLovin"
"Not at the table Carlos"
I know this probably dries out the o-rings but I use brake cleaner to clean the chain. It really breaks down any dirt and grime very, very well and I use an old toothbrush to make sure I get everything out. I take my time when lubing the chain making sure to get maximum coverage. I use Honda HP Lube, it has worked the best for me and as another poster said it goes on and leaves a thin film. For $100, I replace my chain at the end of every season anyways because it's cheap insurance to me.
Sponsor: Visa Credit Card @ 11.9% APR! AWESOME!
Dyno a bike, then put chain lube on it. Check results...
What you will find is horsepower numbers are actually higher with a lubed chain. How long this effect lasts, not tested by me. But I always lube my o-ring chain. Cheap horsepower.
Rob Oliva
www.lithiummotorsports.com
Like Rob said, free horsepower if you look after and lube your chain properly. I used to see 3-4 hp by changing a worn out chain for a new one on customer's bikes. A worn dry chain also has more chance of breaking and destroying cases, just like an improperly installed rivet link.Originally Posted by LMsports
Friction robs horsepower. Another thing I used to do, is if possible, is lube the chain when its hot as it will reduce the 'lube fling' as the lube will set a little. Motocross trick from back in the day :wink:
Mclovin. If your chain ever gets hot enough to heat cycle the rubber to any extent, your chain should have been replaced a while ago. If your chain ever gets hot enough to heat cycle the pins or link plates, it just broke and your only concern now is how to get the chain out of your left butt check!
Dennis Stowers MRA #151
2021-2023 MRA BoD Rider Representative - Rulebook
Absolute Moto-Michelin
Speedin' Motorsports