Results 1 to 15 of 15

Thread: 03 04 GSXR 1000 parts COMPLETED!!!!

  1. #1
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97

    03 04 GSXR 1000 parts COMPLETED!!!!

    GOT ALL THE HARD PARTS!!! \/ To the peeps that helped me out.. you know who you are... THANK YOU!!!!
    ... itchy... when it bites....

  2. #2
    Senior Member Expert
    Join Date
    Mar 2008
    Location
    Evergreen
    Posts
    639
    Hey Mike, call me.
    Martin J. #73 - Motoforza Racing Team
    Motoforza bodywork www.motoforzafairings.com

    Cell: 303-518-5650
    http://i278.photobucket.com/albums/k...gpic3918_6.jpg

  3. #3
    Senior Member Expert
    Join Date
    Aug 2006
    Location
    Parker, CO
    Posts
    575
    I might have a fairing stay

  4. #4
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    Quote Originally Posted by racedk6
    I might have a fairing stay
    Right on... let me know...

    Thanks!
    ... itchy... when it bites....

  5. #5
    Member Novice
    Join Date
    Mar 2008
    Posts
    41
    i have a tweaked fairing stay and a tweaked subframe.
    maybe you could heat it up a little and move it back?

  6. #6
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    Quote Originally Posted by SRAD
    i have a tweaked fairing stay and a tweaked subframe.
    maybe you could heat it up a little and move it back?
    My fairing stay snapped into 3 pieces... I can't salvage it.
    Subframe has been cracked on the mounting area by the frame and is tweaked. I'm having a friend of mine cut it shorter and weld the pieces back together... it will be a challenge...

    Aluminum parts, ugh ](*,) .. Aluminum is difficult to mess with. Stuff just snaps and breaks apart unlike steel where you can bend it to damn near death and pound it into place, and still end up with a pretty good outcome of what to hope for.

    I will get back with you if things dont work out as planned...

    Good looking out though... thanx!
    ... itchy... when it bites....

  7. #7
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    Quote Originally Posted by SRAD
    i have a tweaked fairing stay and a tweaked subframe.
    maybe you could heat it up a little and move it back?
    How tweaked are them parts you have anyways?
    ... itchy... when it bites....

  8. #8
    Member Novice
    Join Date
    Mar 2008
    Posts
    41
    the stay is like 3 inches pushed down on one of the ears.
    and the sub frame is like 3-4 inches pushed down on the right side.
    is was like a 10mph loop.

  9. #9
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    Just got another set of race glass off of ebay... and the difference is now I got a superbike tail with no seat support (it didn't come with the package), shit! #-o

    Where do I get or find this seat support???
    ... itchy... when it bites....

  10. #10
    Senior Member Expert
    Join Date
    Mar 2008
    Location
    Evergreen
    Posts
    639
    Haha Mike, you should have buy Motoforza bodywork. They make the seat allready with the seat support. I'll show you mine later.
    I'll just laminate in piece of 2x4 or something like that
    Thats what I will do
    Martin J. #73 - Motoforza Racing Team
    Motoforza bodywork www.motoforzafairings.com

    Cell: 303-518-5650
    http://i278.photobucket.com/albums/k...gpic3918_6.jpg

  11. #11
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    Quote Originally Posted by Mforza
    Haha Mike, you should have buy Motoforza bodywork. They make the seat allready with the seat support. I'll show you mine later.
    I'll just laminate in piece of 2x4 or something like that
    Thats what I will do
    Hahaha! Coooool... that'll work! \/
    ... itchy... when it bites....

  12. #12
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    Quote Originally Posted by SRAD
    the stay is like 3 inches pushed down on one of the ears.
    and the sub frame is like 3-4 inches pushed down on the right side.
    is was like a 10mph loop.
    PM sent
    ... itchy... when it bites....

  13. #13
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    Quote Originally Posted by SRAD
    i have a tweaked fairing stay and a tweaked subframe.
    maybe you could heat it up a little and move it back?
    Thanks for the hook up!!!! 8)

    Only things left I am in search of (small stuff) :roll:

    1 double banjo bolt for the brembo master cylinder
    1 Front brake reservoir.

    just waiting on ordered parts to come in and I should be back on the saddle. \/
    ... itchy... when it bites....

  14. #14
    Member Novice
    Join Date
    Mar 2008
    Posts
    41
    yeaaaa! i'll have to check you guys out some time.

  15. #15
    Member Amateur Islandermyk's Avatar
    Join Date
    Nov 2009
    Location
    Aurora
    Posts
    97
    Hey everyone... does anyone have a SCOTTS DAMPER mount for a 03 GSXR 1000 hanging around?

    Got a mount for an 02 GSXR 1000 and dammit the triple tree nut for the mount is to small for the 03 bolt, shit! :shock: :cry:

    Let me know if there is anything out there... thanks!
    ... itchy... when it bites....

Similar Threads

  1. GSXR 1000 parts
    By turtle evans in forum Parts For Sale
    Replies: 0
    Last Post: February 20th, 2012, 02:59 PM
  2. 05/06 GSXR 1000 Parts
    By hanzi in forum Wanted!
    Replies: 11
    Last Post: February 17th, 2011, 05:49 PM
  3. 05 - 06 gsxr 1000 parts
    By James W in forum Parts For Sale
    Replies: 3
    Last Post: January 28th, 2010, 05:23 PM
  4. More 03' GSXR 1000 parts
    By Dodd in forum Wanted!
    Replies: 0
    Last Post: July 14th, 2008, 11:25 AM
  5. Replies: 4
    Last Post: March 5th, 2007, 04:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •