Just curious as I ran into some issues and still to new to know what to do about umm.
Just curious as I ran into some issues and still to new to know what to do about umm.
ILLMATIC Racing
MRA#503
well sat I didn't crash and sun I did. Thats what I changed. So Thats what I plan on changing at HPR round 3 is not crashing again.
Kevin #28
'07 Yamaha R6
I worked a lot on suspension setup, rear suspension made the rebound faster, front took out some pre-load and added a little compression....
Changed my gearing a little in the rear, went down a tooth on Sunday, really helped when trying to get the power down and not spinning up the rear tire!!!
This is a 1000cc bike your mileage may differ
Also worked on sections of the track in each practice, asked around and observed what lines looked faster to me...
seat time, seat time, seat time!!!
Keith
MRA #322
Sponsors
G-Force Powersports, Sol Performance ,Pirelli,
Im a complete noob, but fwiw, I increased rebound and compression in 2 clicks on the forks to deal with that divet crossing the tunnel and transitioning from bank to apron in turn 1. I stiffened (uhh, you said stiff) my steering stabilizer(toby) in a total of three clicks. for turn 1 and turn 4.
Mostly I just tried to follow quicker guys as long as I could sack up and do it for, to emulate their lines, and try to figure out where to apex at.
I dont know if it makes a diference or is good or bad, but over the course of the endurance race, I steadily shaved 3 seconds off my lap times doing so.
MRA#420
01 R6
Macro Mellon Recording Studios
Rockymtnphots.com
DBA Construction LLC
Yeah you def got the power down in AMO. :evil:Originally Posted by freddiewest