What would you say would be the best conversion to do to a 09 ZX6?
ILL-matic racing
What would you say would be the best conversion to do to a 09 ZX6?
ILL-matic racing
Bill Burr makes me laugh
#515 09 ZX6
*3nSomeChangeRacing*
Less centrifugal mass is the key here. 520 is usually a safe bet, very common chain and sprocket setup. You can pick up an entire setup off eBay (Vortex front and rear sprocket with RK Gold 520) for around $150. I used that exact setup on all of my stunt bikes and I never had 1 issue, even on my 929 which was -1/+7... never snapped or stretched it.Originally Posted by sikwitit
Sponsor: Visa Credit Card @ 11.9% APR! AWESOME!
Well the 09 zx6r is 520 stock so you don't have to worry about that. -1, +2 or just +4 in the rear is a good starting point, at least at HPR.
Yes, look at E-bay :roll: Im sure your local dealer will be pumped that you patronize his/her business.
auzzy
Go minus one in front before going +4 in rear. you want the least amount of rotating mass on your rear wheel.Originally Posted by peteyt328
Hey Pete, what do you know about an 09? Someone step up to a new bike? :twisted:
Casey D
Just giving him an idea of the kind of prices that are out there. If a local dealer has it that cheap, I'm NEVER buying it from eBay again.Originally Posted by auzzy
Sponsor: Visa Credit Card @ 11.9% APR! AWESOME!
Not to thread-jack, but this raises a good question. Are we associated with any local dealers that offer a MRA discount on parts?
Most dealers give 10% MRA discount but i am not sure why. :?
I am also new around here so I really don't know what dealers to go to. I always bought mine off of eBay because it was easy for me and I really wasn't involved in the MRA.
Now that I'm starting to buy up more parts during the off season so I can have a nice little reserve of things that will most commonly break I would much rather give my business locally, I just don't really know where to go.
I looked in the Club Announcement section but is there a concise list of dealers?
Sponsor: Visa Credit Card @ 11.9% APR! AWESOME!
Sorry Premium I was having a bad day and caused a tangent in the subject, as the gentleman was being helped. My apology for that. The conversions were great advice! Im not from the Lakewood area or I would offer advice for dealers-sorry again-aus
auzzy
It's cool dude, no harm, no foul.Originally Posted by auzzy
Sponsor: Visa Credit Card @ 11.9% APR! AWESOME!
Call Diane at Pero Motorsports or let me know what you guys need :wink:Originally Posted by Munch
Back to the subject at hand.
I would run a -1 +2 setup with Renthal Sprockets and a RK or D.I.D chain.
As far as Lakewood goes, TFOG is over in the 6th and Indiana area, Jim and Jeff are good guys and can get you most things you need.
Brandon
I took a look at a kit I offer over at STEELES CYCLES..it comes with a o-ring chain, -1 in front, and same size rear sprocket..$180.95 its a rk kit..
pm me if your interested..
I'm still learning deal with it...#913
Im not a dealership..I have access to alot of products where im at.. I have autho to work with mra members discount wise..pm if interested
I'm still learning deal with it...#913
Thank you everybody for your help. I found a buch a places online that have great prices
Bill Burr makes me laugh
#515 09 ZX6
*3nSomeChangeRacing*