Do you need a custom CNC machined part?
Lightened rotors, wheel spacers, exhaust mounts etc...
Call or email Jay Yarrington @ 720-231-1319 or faithfulracer19@msn.com
20+ years as Prototype Machinist
Do you need a custom CNC machined part?
Lightened rotors, wheel spacers, exhaust mounts etc...
Call or email Jay Yarrington @ 720-231-1319 or faithfulracer19@msn.com
20+ years as Prototype Machinist
JBOB
MRA #19
1990 FZR1000
2005 GSX-R 1000
Hey Jay,
1 for you as we know and love you and your abilities!
where are you located?
Benny Tozzi #78
Tri City Cycle
Check out Dave@SingleTrackMind for your suspension needs!
www.fixmybike.com
www.getwellclarkie.com
+1 for Jay, he has helped our shop and race bikes in the past, good stuff!
I agree, Jay has done some great work for me on my personal and professional projects!
Kevin F. McGuire
MRA #expired
Ecological minded racing. Doing my part to take this country to the next fuel source by burning as much petroleum product as I can!
Sponsors; Kristie McGuire, Un!nk Printworks, MRA
+100.
Jay has been around the MRA forever and is one stand up guy. Good work, good guy, can't go wrong.
dave@MotoSix DOT com | MRA #31, WERA #311
Hey Jay - you gonna show your handsome face and your svelte physique around the pits sometime this coming year??
how about cutting out a large piece of plexi?
not sure how big it is yet, but it would be a boat windshield half. i was looking for a large engraver (cnc mill is overkill i think)
Justin
Justin Meyer
#74
Hope to be showing up this year if my financial situation allows.
Plexi depends on how big,cnc may be over kill but whatever works keep
me posted. 8)
Live in Brighton,work in Lafayette.
Thanks to all for the Great PR!!!!!
JBOB
MRA #19
1990 FZR1000
2005 GSX-R 1000
thanks!
No doubt about it that's a beautiful part, but that's definitely going to cause some ground clearance issues for ya! :lol: :lol:
Many Thanks to those who have sent work my way!!
If you need it and can"t buy it,I'll make it....
JBOB
MRA #19
1990 FZR1000
2005 GSX-R 1000
That is one sexy piece of machine work!
Fred SpongeButt Slowpants Roth
MRA811
I may be old, I may be slow, but..... aw rats, I'm old and slow.
Many thanks to those of you who have allowed me to assist you with your machining needs. With your help I might be able to race a few times this summer.
Thanks again
:lol:
JBOB
MRA #19
1990 FZR1000
2005 GSX-R 1000
I am not Racin but I ain't dead yet would still like to help out with any work you guy's need!!!!!
JBOB
MRA #19
1990 FZR1000
2005 GSX-R 1000
Jay did a bunch of rear rotors last year for us, beautiful work...
Jay come back and show em how it's done in Modern Vintage!
#145 Wyeth Jackson
Wyeth Homes Real Estate www.WyethHomes.com
G-Force Powersports, Pirelli & Sol Performance, CT Racing, Kawasaki, Bell Helmets, TCX Boots, Vortex, Racers Edge, Un!nk Printworks, Motul, Vortex, Rising Sun Cycles, CHR, Attack Performance, NinjaTech
Was that from a stock rotor, or totally new?Originally Posted by oldtimer
MotoLlama Racing
www.motolla.ma
www.facebook.com/MotoLlama
Twitter @MotoLlama
Llama Schwag! www.cafepress.com/motollama
#321! Supported by Western Ambulance, ProRT, Chicane Trackdays, Single Track Mind, Rebellion, Vanmar, Wicked Photos, and my family.
That was a stock Kawi rotor, Jay designed his own pattern and cut the stock rotors into these for us.
#145 Wyeth Jackson
Wyeth Homes Real Estate www.WyethHomes.com
G-Force Powersports, Pirelli & Sol Performance, CT Racing, Kawasaki, Bell Helmets, TCX Boots, Vortex, Racers Edge, Un!nk Printworks, Motul, Vortex, Rising Sun Cycles, CHR, Attack Performance, NinjaTech
How much to lighten a stock rear rotor?? oh3 R6 if it matters
ILLMATIC Racing
MRA#503
Hey Nik contact Jay, if he already has a pattern it would be cheaper, or if you do more than one.Originally Posted by N1K
Call or email Jay Yarrington @ 720-231-1319 or faithfulracer19@msn.com
#145 Wyeth Jackson
Wyeth Homes Real Estate www.WyethHomes.com
G-Force Powersports, Pirelli & Sol Performance, CT Racing, Kawasaki, Bell Helmets, TCX Boots, Vortex, Racers Edge, Un!nk Printworks, Motul, Vortex, Rising Sun Cycles, CHR, Attack Performance, NinjaTech
Kind of curious about some "tall boy" rearsets for an RS125.. Like the ones Mr. Heljm used to make..