How can I safety wire the front axle and pinch bolts on my Ducati monster 750? The pinch bolts and axle are all recessed into the fork legs and I don't see any way to wire them. Would RTV be OK on these bolts or is there some trick Im missing? If anyone has experience with wiring an air cooled duc your help would be greatly appreciated. Thanks!
You'll probably have to drill through the fork bottom into the bolts.
pm sent
RS 125
TZ 250
#738
Where do you live? I'm sure you can find a racer that lives near by to come over and do a quick overview of everything on the bike for you.
I am in the Springs. I could make something work if I drilled the forks. I was hoping I wouldn't have to but, if that's what it takes! Everything else is wired I just need an example to work from on this.
here is a pic of what i did with the recessed caliper mount bolt on my 748, hope this helps
RS 125
TZ 250
#738
man glad i gound this. assuming that since ray didnt disagree this is still acceptable.
While on the topic, anyone have pics of levers wired? I got the banjo bolts done, would like to see a set of levers if possible!
Posting Permissions
Reply With Quote