Anyone have a scooter flywheel puller (ATV, etc) that I can borrow for an hour or so? I need to pop this off:
(horizontal 50cc Malagutti/Zuma/etc scoot motor)
Anyone have a scooter flywheel puller (ATV, etc) that I can borrow for an hour or so? I need to pop this off:
(horizontal 50cc Malagutti/Zuma/etc scoot motor)
dave@MotoSix DOT com | MRA #31, WERA #311
Oh, and it is a 20 or so MM right hand (not left hand) thread. NOt sure what the pitch is, but it is at least 1.00 and probably bigger.
dave@MotoSix DOT com | MRA #31, WERA #311
Rope and your 4x4, I dont see a problem :?
This isn't a Ducati.
This is a purpose-bred Grand Prix roadracer!
(well, it tries pretty hard at least...)
dave@MotoSix DOT com | MRA #31, WERA #311
Can't you take the three socket head screws out, get longer ones, and use a general purpose puller like this http://tinyurl.com/25lyn78
Probably.Originally Posted by Jim 'smooth' Brewer
If I had one.
dave@MotoSix DOT com | MRA #31, WERA #311
Originally Posted by dave.gallant
1" wide 1/8" thick 3" long piece of steel strap
a half inch bolt and nut about 2" long
drill 1/2" hole in center of metal strap
weld nut(with your fancy tig welder) over that hole
drill 2 holes in corresponding spacing to the 6mmx1.00 bolts
bolt metal strap to flywheel
run half inch bolt in center nut that welded on strap
pull flywheel
carry on with whatever madness that is ensuing.
Ben Fox- http://i24.photobucket.com/albums/c2..._Taimotive.gif
"I'd rather be quick than fast"~Me
MRA #95
2006/2007 MRA VP of Rules and Tech
2008 ROR #10
http://www.foxperformanceengines.com/images/logo.gif
www.FOXPERFORMANCEENGINES.com
(719) 570-9595
I had another creative idea along those lines yesterday.
I will spare you the details. It didn't work.
If I had a flux capacitor though, it would have! I threw that away during the move...
dave@MotoSix DOT com | MRA #31, WERA #311
I still think a rope and your 4x4, be really entertaining for us to watch
you threw away your welder?Originally Posted by dave.gallant
Ben Fox- http://i24.photobucket.com/albums/c2..._Taimotive.gif
"I'd rather be quick than fast"~Me
MRA #95
2006/2007 MRA VP of Rules and Tech
2008 ROR #10
http://www.foxperformanceengines.com/images/logo.gif
www.FOXPERFORMANCEENGINES.com
(719) 570-9595
I traded it for a Russian vhor...errr, bride.Originally Posted by benfoxmra95
(She ran off with it.)
dave@MotoSix DOT com | MRA #31, WERA #311
It's like $10-12 at AutoZone. Throw in a couple more bucks for metric screws and washers to fit your flywheel.Originally Posted by dave.gallant
Dave I have the one you need come by and grab it anytime.
I stopped by the Harbor of Freight on Sunday and got a 3 pronged thinger ma jinger. If it turns out to be too wide, I will throw the little lug under my arm and bring her in to see you and your puller Bartman. Thanks!Originally Posted by Bartman
dave@MotoSix DOT com | MRA #31, WERA #311