Results 1 to 14 of 14

Thread: Need novices to work dealer open houses Sat May 15th

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    President Expert
    Join Date
    Mar 2005
    Location
    Nunya
    Posts
    4,441

    Need novices to work dealer open houses Sat May 15th

    The MRA will have displays set up at both Fay Myers and Colorado Powersports Boulder on Saturday May 15th for their open houses. I need 4 volunteers to work these events; 2 at Fays and 2 at CoPow. There will be two 4 hour shifts at each. Novices this will take care of your novice hours for this season. Please respond or PM me if interested.
    Thanks
    MRA #29

  2. #2
    President Expert
    Join Date
    Mar 2005
    Location
    Nunya
    Posts
    4,441
    Still looking for volunteers to work the 2 dealer open houses this Saturday, May 15th.
    MRA #29

  3. #3
    Senior Member Amateur
    Join Date
    Oct 2008
    Posts
    273
    Co Powersports is one of my sponsors, I will volunteer to work some hours down there! Let me know if you need any display, my bike isn't so pretty any more but it gets the idea across
    Pete Tabor
    MRA #599
    --------------------------
    Fun Center Cycles
    Sol Performance
    Speedin' Motorsports

  4. #4
    Senior Member Amateur Snowman's Avatar
    Join Date
    Feb 2009
    Location
    Denver, Colorado
    Posts
    134
    If you are still short, I can work Fay on the 15th. I
    've already worked off my novice hours and I'm not even a Novice yet. Long story. If there are Novices needing to work off their hours of course thet can cut ahead of me.

  5. #5
    President Expert
    Join Date
    Mar 2005
    Location
    Nunya
    Posts
    4,441
    Quote Originally Posted by peteyt328
    Co Powersports is one of my sponsors, I will volunteer to work some hours down there! Let me know if you need any display, my bike isn't so pretty any more but it gets the idea across
    Peter, do you want to work 9-1 or 1-5 on Saturday?

    Quote Originally Posted by Snowman
    If you are still short, I can work Fay on the 15th. I
    've already worked off my novice hours and I'm not even a Novice yet. Long story. If there are Novices needing to work off their hours of course thet can cut ahead of me.
    Thanks Randall. I have someone for the morning but I will keep you penciled in for the afternoon if we do come up short.
    MRA #29

  6. #6
    Senior Member Amateur
    Join Date
    Oct 2008
    Posts
    273
    9-1 sounds better to me. Will I have any company or am I flying solo?
    Pete Tabor
    MRA #599
    --------------------------
    Fun Center Cycles
    Sol Performance
    Speedin' Motorsports

  7. #7
    President Expert
    Join Date
    Mar 2005
    Location
    Nunya
    Posts
    4,441
    Quote Originally Posted by peteyt328
    9-1 sounds better to me. Will I have any company or am I flying solo?
    Jeff Brown will be there.
    MRA #29

  8. #8
    Senior Member Expert
    Join Date
    Apr 2005
    Location
    Parker, CO
    Posts
    930
    Jim

    If you can't find any novices to help out on the 15th at Fay .. I can help out for a while.

    Let me know

    Joe
    Imperial Sportbikes | Performance Cycle | Galfer | Factory Effex | Motorex | AXO | Racer Gloves USA | | Woodcraft | Armour Bodies | Driven

  9. #9
    Senior Member Amateur Snowman's Avatar
    Join Date
    Feb 2009
    Location
    Denver, Colorado
    Posts
    134
    You guys get everyone you need for this weekend?

  10. #10
    Senior Member Expert
    Join Date
    Oct 2007
    Location
    Denver
    Posts
    1,534
    Jim and Pete we're doing the afternoon shift at CoPow, since Peter and Brownie can work the morning shift. We should be there before 1 to unload and set up. I can bring the table and banner, etc back with me when we're done if Brownie leaves after the morning.
    #145 Wyeth Jackson
    Wyeth Homes Real Estate www.WyethHomes.com
    G-Force Powersports, Pirelli & Sol Performance, CT Racing, Kawasaki, Bell Helmets, TCX Boots, Vortex, Racers Edge, Un!nk Printworks, Motul, Vortex, Rising Sun Cycles, CHR, Attack Performance, NinjaTech

  11. #11
    Senior Member Expert
    Join Date
    Mar 2005
    Location
    The Local Topless Bar!
    Posts
    2,358
    I can be there as long as I am needed..... Jeff's Gigolo service has no appointments till the sun goes down. 8)
    Jeff Brown, #277
    "What can Brown do for you!"
    2011-2022 New Rider Director
    2008-2010 MRA Rider Representative

  12. #12
    President Expert
    Join Date
    Mar 2005
    Location
    Nunya
    Posts
    4,441
    Quote Originally Posted by Snowman
    You guys get everyone you need for this weekend?
    Randall, we have it covered.
    MRA #29

  13. #13
    Senior Member Expert
    Join Date
    Oct 2007
    Location
    Denver
    Posts
    1,534
    Quote Originally Posted by Throttleroller277
    I can be there as long as I am needed..... Jeff's Gigolo service has no appointments till the sun goes down. 8)

    You are the hardest workin guy I know!
    #145 Wyeth Jackson
    Wyeth Homes Real Estate www.WyethHomes.com
    G-Force Powersports, Pirelli & Sol Performance, CT Racing, Kawasaki, Bell Helmets, TCX Boots, Vortex, Racers Edge, Un!nk Printworks, Motul, Vortex, Rising Sun Cycles, CHR, Attack Performance, NinjaTech

  14. #14
    Senior Member Amateur
    Join Date
    Apr 2009
    Location
    D'troit, MI
    Posts
    144
    see you folks tomorrow!
    Dave

Similar Threads

  1. Thank you to all the members who worked Open Houses
    By oldtimer in forum General Discussion
    Replies: 0
    Last Post: June 6th, 2011, 10:16 AM
  2. Need novices to work dealer open houses Sat July 17th
    By JimWilson29 in forum General Discussion
    Replies: 8
    Last Post: July 9th, 2010, 04:58 PM
  3. Great MRA Support at Dealer Open Houses Today!
    By oldtimer in forum General Discussion
    Replies: 1
    Last Post: May 17th, 2010, 02:35 PM
  4. Great PR event for the MRA *Novices can work off hours*
    By oldtimer in forum MRA Marketing & PR
    Replies: 41
    Last Post: December 1st, 2009, 06:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •