Results 1 to 5 of 5

Thread: RC51 stuff I dont need anymore

  1. #1
    Member Novice
    Join Date
    Sep 2016
    Location
    Broomfield
    Posts
    41

    RC51 stuff I dont need anymore

    Three dashes, Two have the infamous "crack" that appears on these while the other low mileage unit needs some work.

    $200 for the unit listed as 21,240 miles
    $260 for the unit marked 4,148 miles
    This last unit needs some work. There is no cover for the unit, the lower left LCD screen is blued out but I believe that's the Speedo side of the unit. This was on a track bike and always covered. Perhaps you could bust out your soldering iron and swap the screen from your high miles unit?

    $150 takes it and it only has 8,092 miles.




    So tired!

  2. #2
    Member Novice
    Join Date
    Sep 2016
    Location
    Broomfield
    Posts
    41
    2 SP2 fairing stays...75 plus shipping per unit (Great style upgrade for your SP1)
    So tired!

  3. #3
    Member Novice
    Join Date
    Sep 2016
    Location
    Broomfield
    Posts
    41
    3 ECU's $160 a piece,

    The reflective tape seen on the units was preventative due to the locations I had them on the bikes I owned. They are functioning and plug and play. All units have the marking HONDA ABS-GF20 on them Not sure if that's SP1 or SP2 (or if it matters).
    So tired!

  4. #4
    Member Novice
    Join Date
    Sep 2016
    Location
    Broomfield
    Posts
    41
    CDI $200

    Should fit both models, priced well below average sold units on Ebay.
    So tired!

  5. #5
    Member Novice
    Join Date
    Sep 2016
    Location
    Broomfield
    Posts
    41
    Item sold
    (HRC header)
    Last edited by White Wings; September 28th, 2016 at 12:42 PM.
    So tired!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •