Results 1 to 19 of 19

Thread: Clipons

  1. #1
    Senior Member Expert
    Join Date
    Sep 2006
    Location
    Littleton, CO
    Posts
    1,228

    Clipons

    I need some clipons for my 04 r6. I have morse ones on there now so something to that affect. PM me with info. Thanks.

  2. #2
    Senior Member Expert
    Join Date
    Mar 2005
    Location
    Highlands Ranch
    Posts
    711
    do you just need the bars or the actual clip on portion?
    Jason Leleck
    MRA #399

  3. #3
    Senior Member Expert
    Join Date
    Sep 2006
    Location
    Littleton, CO
    Posts
    1,228
    I just need the bars. They are morse right now so I don't know if another brand would work, maybe.

  4. #4
    Senior Member Expert
    Join Date
    Mar 2005
    Location
    Highlands Ranch
    Posts
    711
    woodcraft, vortex and i think graves as well (as many others) replacement bars will fit, they are about $15 bucks each, you should always have at least 2 with you in the trailer
    Jason Leleck
    MRA #399

  5. #5
    Senior Member Expert
    Join Date
    Sep 2006
    Location
    Littleton, CO
    Posts
    1,228
    cool thanks jason, does anyone have non bent ones for sale?

  6. #6
    Senior Member Expert
    Join Date
    Apr 2005
    Posts
    1,257
    you might want to take out one of those morse bars and look at it. the morse bars have notches in them where the bolts go through. vortex and woodcraft dont have those.

  7. #7
    Senior Member Amateur
    Join Date
    Apr 2005
    Location
    Denver, CO
    Posts
    481
    This is aircraft strength NO -seam aluminum that I use for spare clipon tubes. I bought 2 X 4' lengths of tube, and cut them down to 9". in the end you have tubes for under $5- a piece. I ordered 2 x 4 foot lengths instead of one 8 foot length so it can come via regular UPS and save $.

    Go here:

    http://www.aircraftspruce.com/

    Alloy:
    6062T6
    Outside Diameter:
    7/8
    Wall:
    .110
    Part number:
    03-36500
    Length:
    4
    Quantity:
    2

  8. #8
    Senior Member Expert
    Join Date
    Sep 2006
    Location
    Littleton, CO
    Posts
    1,228
    Mike, they do, so does that mean I can only run morse?

  9. #9
    Senior Member Amateur
    Join Date
    Oct 2006
    Location
    Colorado Springs
    Posts
    128
    :idea: DB, why don't you just call Morse and see if he has any?

  10. #10
    Senior Member Expert
    Join Date
    Mar 2005
    Location
    Highlands Ranch
    Posts
    711
    Quote Originally Posted by MyDingleBurns
    Mike, they do, so does that mean I can only run morse?
    doh i forgot about those... you need to grind some notches into whatever you use.

    Quote Originally Posted by Puck
    DB, why don't you just call Morse and see if he has any?
    I think morse stopped making clipons almost 2 years ago
    Jason Leleck
    MRA #399

  11. #11
    Senior Member Expert
    Join Date
    Sep 2006
    Location
    Littleton, CO
    Posts
    1,228
    So does anyone have some?

  12. #12
    Senior Member Expert
    Join Date
    May 2005
    Location
    Firestone, CO
    Posts
    2,303
    Quote Originally Posted by cu260r6
    This is aircraft strength NO -seam aluminum that I use for spare clipon tubes. I bought 2 X 4' lengths of tube, and cut them down to 9". in the end you have tubes for under $5- a piece. I ordered 2 x 4 foot lengths instead of one 8 foot length so it can come via regular UPS and save $.

    Go here:

    http://www.aircraftspruce.com/

    Alloy:
    6062T6
    Outside Diameter:
    7/8
    Wall:
    .110
    Part number:
    03-36500
    Length:
    4
    Quantity:
    2

    Interesting idea.... Are they stronger? One would assume so...

  13. #13
    Senior Member Amateur
    Join Date
    Apr 2005
    Location
    Denver, CO
    Posts
    481
    Dunno? B I assume they're at least the same strength as those are the same specs and material most clipon makers use.

  14. #14
    Senior Member Amateur
    Join Date
    May 2005
    Location
    ENGLEWOOD COLORADO
    Posts
    116
    My God, Berns!!!!!!!! Just go to Faster, and BUY SOME, they have a shelf full of them!!!!!!!!!!!! Then file the groove in them to fit the brackets!! ](*,)
    CHALLENGE IMPROVES YOU

    43

  15. #15
    Senior Member Expert
    Join Date
    Sep 2006
    Location
    Littleton, CO
    Posts
    1,228
    Thanks for the info smitty, I didn't know that.

  16. #16
    Senior Member Expert
    Join Date
    Apr 2005
    Posts
    1,257
    we don't have any of the Morse bars at Faster but since you list Morse as a sponsor why are you not calling them?

  17. #17
    Senior Member Expert
    Join Date
    Sep 2006
    Location
    Littleton, CO
    Posts
    1,228
    I did, waiting for reply....

  18. #18
    Senior Member Expert
    Join Date
    May 2005
    Location
    Firestone, CO
    Posts
    2,303
    Just went down to Faster last week and got me a pile of them for spares.

    Thanks guys!!!! 8)

  19. #19
    Senior Member Expert
    Join Date
    Nov 2006
    Location
    Littleton, Co
    Posts
    1,659
    this is where i got mine:

    http://www.1tail.com/sa/p/Woodcraft_...r_Clip-ons.htm

    if you buy 6 or more they are only $11 each.
    Casey D

Similar Threads

  1. Replies: 4
    Last Post: June 1st, 2011, 09:09 PM
  2. 50mm Woodcraft Clipons
    By racedk6 in forum Parts For Sale
    Replies: 3
    Last Post: April 25th, 2011, 12:29 PM
  3. 50MM WOODCRAFT CLIPONS BLACK-----SOLD!!
    By gyrtr1 in forum Parts For Sale
    Replies: 3
    Last Post: June 4th, 2010, 10:38 AM
  4. Replies: 1
    Last Post: May 19th, 2007, 05:39 PM
  5. Replies: 13
    Last Post: March 27th, 2007, 11:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •