Yep, it's really this good!
http://www.youtube.com/watch?v=PBO2a...=results_video
Yep, it's really this good!
http://www.youtube.com/watch?v=PBO2a...=results_video
Tony Baker #21
Sponsored by:
Vickery Motorsports, Short Bus Race Team, 406 Racing Michelin, Vortex, PitBull, Driven, Third Bridge Wines, Imodium A-D
Never give up your inside line Tony!! You had him.....until he took the inside line in T2.
Ray-Ray Gaimara #16
2011-2013 Track Marshal RETIRED
2008-2009 VP of Rules and Tech
1996-2007 Corner worker/Head Corner worker/Airfence Caption
2017 Sponsors - Fun Centers Cycle, Ogio, Sol Performance, Vickery Motorsports
That was Ari Henning. He's not even a little bit afraid to fall down... There's a shot where he's coming into the up-hill slide and he's totally on the front wheel - blows the line, and STILL makes the pass at the top. Crazy Effer! I had a long drive home just ahead of me. Maybe next time...!
Tony Baker #21
Sponsored by:
Vickery Motorsports, Short Bus Race Team, 406 Racing Michelin, Vortex, PitBull, Driven, Third Bridge Wines, Imodium A-D
That's awesome. I love it. Does the club still have bikes to loan?
The club never had bikes to loan.... That being said. You might get someone to loan you their bike. I know Coonshead loaned out his several times last season.Originally Posted by glenngsxr
Ray-Ray Gaimara #16
2011-2013 Track Marshal RETIRED
2008-2009 VP of Rules and Tech
1996-2007 Corner worker/Head Corner worker/Airfence Caption
2017 Sponsors - Fun Centers Cycle, Ogio, Sol Performance, Vickery Motorsports
Too cool....
Just wait for tony to get drunk (around 5:45pm), then steal his.The club never had bikes to loan.... That being said. You might get someone to loan you their bike. I know Coonshead loaned out his several times last season.
MotoLlama Racing
www.motolla.ma
www.facebook.com/MotoLlama
Twitter @MotoLlama
Llama Schwag! www.cafepress.com/motollama
#321! Supported by Western Ambulance, ProRT, Chicane Trackdays, Single Track Mind, Rebellion, Vanmar, Wicked Photos, and my family.
Not to mention that his bike is completely built up and no where near legal for the class MRA or CVMA.
MRA #137
CVMA #137x
So that's twice in a month you've made that claim...Not to mention that his bike is completely built up and no where near legal for the class MRA or CVMA.
I asked last time and you didn't respond, so I'll ask again - what makes his bike "no where near legal"?
Geoff Snyder
#76
Sponsors:
Jeanine Snyder/Wealth Advisor Northwestern Mutual - Quikcycles - Sol Performance - Pirelli Tires - Vortex Racing - Galfer USA - AXO - Bell Helmets - SPY - Leatt Protectives - Amsoil - Honey Stinger - Forcefield Body Armour - Rockwell Watches - Virus -
I suppose it depends on what organization you are racing with and what their particular rules are. I remember reading (either online or in a magazine) part of what they have done to that bike, and it included aftermarket engine modifications (including tuner, etc). I don't remember what all else for sure, but they changed quite a bit on that bike, some of which would fall outside the MRA Production 250 rules.
MRA #760
His engine head decked and has custom made camshafts. Also, I think he has an Ohlins shcok in the rear. I believe any of that would make it illegal in the MRA for the 250 prod class.
And no one protested? :? Hmmm...
Geoff Snyder
#76
Sponsors:
Jeanine Snyder/Wealth Advisor Northwestern Mutual - Quikcycles - Sol Performance - Pirelli Tires - Vortex Racing - Galfer USA - AXO - Bell Helmets - SPY - Leatt Protectives - Amsoil - Honey Stinger - Forcefield Body Armour - Rockwell Watches - Virus -
It may be legal in the AFM events he raced? Dunno. Also, his motor still made less power than a Kawi 250 even after those mods so it's not like he brought a 50 hp motor to a grid full of 250s...
I would expect it was legal for the classes he was racing. If I remember the article right, they ended up a bit down on power, but were a fair amount lighter than a Ninja 250 as well.
MRA #760
Sorry, I'm not on here all that often. Ari's engine is completely built with a decked head, lighter rods, adjustable cam gears, I think he also has high compression pistons too. It's no secret, if you talk to Ari he'll tell you what's done to the bike in order to compete with the Ninja's.So that's twice in a month you've made that claim...Not to mention that his bike is completely built up and no where near legal for the class MRA or CVMA.
I asked last time and you didn't respond, so I'll ask again - what makes his bike "no where near legal"?
MRA #137
CVMA #137x
For CVMA the shock and decked head are legal, but the cams and adjustable sprockets are not allowed.
MRA #137
CVMA #137x
For the 250 class this year I think i am going to put gas in my ninja....maybe even a new set of tires once in a while. I can't think of any other performance upgrades....
and if you are all really lucky...i might just race the whole season...no promises!
what is a decked head??
#912
Ex500-retired SuperStreet bike
EX250R...ex500 had too much power.
-------------------------------------------------------
Sponsors
My wife
Decking the head involves shaving a small amount off of where the cylinder head meets the block. This gives a bump in the compression ratio and helps squeeze a few extra ponies out.
----
Jim Søiland
#93
Blood Nickel Leathers
Vortex
Its what your gonna get if you take that saying "break a leg" literally again this year!!what is a decked head??
MRA #406
406 Racing
Michelin
Speedin Motorsports
RockyMtnPhotos
STM Suspension
Custom Collision Repair
420science.com
.... not kind. LolIts what your gonna get if you take that saying "break a leg" literally again this year!!what is a decked head??
----
Jim Søiland
#93
Blood Nickel Leathers
Vortex
This^^^^^^^^^^Its what your gonna get if you take that saying "break a leg" literally again this year!!what is a decked head??
MRA #137
CVMA #137x
Posting Permissions
Reply With Quote