View Full Version : FZR 600 stuff
mopoet178
December 6th, 2010, 02:11 PM
There has got to be several racers out there with old FZR stuff in their basement they have no use for anymore. If you do not have a use for this stuff, I probably do. If you have something that I would find useful for my FZR frankenbike, please donate to this faithful cornerworker/aspiring racer/poor college student.
-Marsh
vort3xr6
December 6th, 2010, 03:49 PM
Good luck Marsh. If I had anything, I would gladly help out.
Bump for a good guy who needs some parts.
Bartman
December 6th, 2010, 04:47 PM
What do you need, prolly have more luck with specifics.
Scored51
December 6th, 2010, 05:08 PM
I do have an FZR 600 in pieces right now. What parts are you looking for?
mopoet178
December 8th, 2010, 03:25 PM
Things I could use:
-clipons and foot pegs always ->spares
-radiator. fin condition unimportant, just has to hold water and be able to fit stock mounting points ->spare
-1994+ front fork big tubes and/or any year small tubes ->spares
-front axle ->spare
-triple clamps ->spare
-any 520 front sprockets
Especially:
-rear axle ->immediate replacement
-1st gen YZF drive chain tensioners/aligners ->immediate replacement
-brembo front wheel bearing spacer for 1999 17xMT3.50 DOT E, or the dimensions for the spacer so I can make one
Dream goodies:
-flat slide carbs ->really am dreaming now
-track plastics, specifically a nose cone with clear screen. generic/ugly is fine.
Not critical, but I would take it:
-aftermarket rear shock ->just to have options
-aftermarket exhaust header. Mine has several substantial dents that probably restrict airflow
The bike is whole now and as trackworthy as it has ever been, so I am preparing for next season's carnage keeping in mind what I have broken in the past, as well as properly fixing a couple things that I fudged together last season.
-Marsh
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.