Front end for CBR600 F2 and up or other Honda front end

[Mforza]

Looking for complete front end for F2 and up for reasonable price.
I might be able to use any other sport/street Honda front end with dual brakes also.

Need this for a supermono project :)

Let me know if you have something I might use.

Thx Martin

[rybo]

Martin,

How about an SV front end?

S

[Mforza]

Only one side brake. I would like to have 2. :) Need to fit Hawk 650 frame.

But if I do not find any then I will have to look at it if that will fit.

[rybo]

Sv has 2 front brakes

and the same fork tube diameter as the Hawk (41mm)

Should be able to slide these tubes right into your triples and go!

I have: Forks, wheel, brake rotors, calipers, master cylinder, clip on's, triples (if you need them) etc.

[Scored51]

I would suggest getting an F3 front end instead. Same fork tube diameter, but fully adjustable cartridge style internals and bigger brakes with same fitment options. Another front end that fits is the early 90's GSX-R 750 inverted forks. What's the motor Martin?

[Mforza]

I'm planning to use XR650R motor but did not find one yet so that is still to be decided :)

Scot, if that's the case, I would like to look at it. How much?

I think whatever will fit I will use :)

[rybo]

sent you a PM martin

[r1-superstar]

I have a 95 900RR front end. :)

[Mforza]

Going to try Scots SV front end. If that dos not work I'll get back to you for that 900rr. :)

[Scored51]

If you do grab an entire front end from the 900RR, it's a 16 inch wheel and the tire is a 130/70. I believe the common conversion there is an F3 front wheel.

[Mforza]

Thx for the input Chris :)
I think that's out of question then as I do not want to use 16 inch wheel.

I hope that the SV will fit :)

[250lemans]

i have a complete 01 vfr800 front end with leaking forks, it's in new mexico though

[Mforza]

Going to try the SV front first then will see after that.

[Bartman]

Thx for the input Chris :)
I think that's out of question then as I do not want to use 16 inch wheel.

I hope that the SV will fit :)

All you do with the 900rr front end is put on the 17" wheel from a F3 and there you go. On a side note the 900 front is waaaaaaay better than a SVs.

[Mforza]

Thx Bart :)

I might give it a try.

[r1-superstar]

Thx Bart :)

I might give it a try.

PM replied to. 8)