PDA

View Full Version : Need a custom part?


modvin1
January 11th, 2009, 11:58 AM
Do you need a custom CNC machined part?
Lightened rotors, wheel spacers, exhaust mounts etc...

Call or email Jay Yarrington @ 720-231-1319 or faithfulracer19@msn.com

20+ years as Prototype Machinist
Jon
January 11th, 2009, 01:27 PM
Hey Jay,
1 for you as we know and love you and your abilities!
motobum
January 11th, 2009, 01:36 PM
where are you located?
Racing616
January 11th, 2009, 04:57 PM
+1 for Jay, he has helped our shop and race bikes in the past, good stuff!
kfm61
January 11th, 2009, 07:28 PM
I agree, Jay has done some great work for me on my personal and professional projects!
dave.gallant
January 11th, 2009, 10:37 PM
+100.

Jay has been around the MRA forever and is one stand up guy. Good work, good guy, can't go wrong.
Jim 'smooth' Brewer
January 11th, 2009, 11:50 PM
Hey Jay - you gonna show your handsome face and your svelte physique around the pits sometime this coming year??
turbohoje
January 12th, 2009, 03:35 AM
how about cutting out a large piece of plexi?

not sure how big it is yet, but it would be a boat windshield half. i was looking for a large engraver (cnc mill is overkill i think)

Justin
modvin1
January 12th, 2009, 06:27 AM
Hope to be showing up this year if my financial situation allows.

Plexi depends on how big,cnc may be over kill but whatever works keep
me posted. 8)

Live in Brighton,work in Lafayette.

Thanks to all for the Great PR!!!!!
jah
February 6th, 2009, 08:33 AM
thanks!
marty
March 2nd, 2009, 09:09 PM
bump, here is a pic of some of jays work. on the right is the old nut for my starter tool, and on the left is the new piece jay made for me.
http://img24.imageshack.us/img24/5511/misc012.th.jpg (http://img24.imageshack.us/my.php?image=misc012.jpg)
http://img353.imageshack.us/img353/8122/misc011.th.jpg (http://img353.imageshack.us/my.php?image=misc011.jpg)
Scored51
March 5th, 2009, 09:33 AM
No doubt about it that's a beautiful part, but that's definitely going to cause some ground clearance issues for ya! :lol: :lol:
modvin1
April 11th, 2009, 05:04 AM
Many Thanks to those who have sent work my way!!
If you need it and can"t buy it,I'll make it....
froth
April 11th, 2009, 07:01 AM
That is one sexy piece of machine work!
modvin1
May 13th, 2009, 08:16 PM
Many thanks to those of you who have allowed me to assist you with your machining needs. With your help I might be able to race a few times this summer.


Thanks again
:lol:
modvin1
June 27th, 2011, 03:49 PM
I am not Racin but I ain't dead yet would still like to help out with any work you guy's need!!!!!
oldtimer
June 27th, 2011, 06:14 PM
Jay did a bunch of rear rotors last year for us, beautiful work...

http://farm6.static.flickr.com/5280/5878678183_038d0234c7.jpg


Jay come back and show em how it's done in Modern Vintage! :D
rforsythe
June 27th, 2011, 07:06 PM
Jay did a bunch of rear rotors last year for us, beautiful work...

http://farm6.static.flickr.com/5280/5878678183_038d0234c7.jpg


Jay come back and show em how it's done in Modern Vintage! :D

Was that from a stock rotor, or totally new?
oldtimer
June 27th, 2011, 07:08 PM
That was a stock Kawi rotor, Jay designed his own pattern and cut the stock rotors into these for us.
N1K
June 28th, 2011, 06:17 PM
How much to lighten a stock rear rotor?? oh3 R6 if it matters
oldtimer
June 30th, 2011, 10:34 AM
How much to lighten a stock rear rotor?? oh3 R6 if it matters

Hey Nik contact Jay, if he already has a pattern it would be cheaper, or if you do more than one.

Call or email Jay Yarrington @ 720-231-1319 or faithfulracer19@msn.com
AR
June 30th, 2011, 10:47 AM
Kind of curious about some "tall boy" rearsets for an RS125.. Like the ones Mr. Heljm used to make..