PDA

View Full Version : exhaust tubing bends???



TBSgraphics
September 16th, 2007, 07:46 PM
any one have access to a tubing bender(good one), I need 2, 90 degree elbows from 1 7/8 or 2 inch tubing, as small radius as possible, and about 4 inch stright part on each end...

let me know and cost, if you can bring it to peublo....


Thanks
Frank

Hotrod
September 16th, 2007, 09:45 PM
Frank, I have a good one at work... What wall thickness do you need?
You should still have my # from when you did my can.