EX300 Ninjette Ignition

[DUCDOC]

Has anyone removed the ignition switch for racing on an EX250 or EX300? I am looking to eliminate the switch on a customers racebike & need a schematic or at least the resistance factor of the resistor located in the switch. 2013 EX300

Thanks!
Gabe.

[rohorn]

The resistor that goes between the hot contact and the gray wire (At least on the EX250 and the EX500 - not sure about the EX300) is 100 Ohms. I run a DPST switch in place of the key switch with a 1 watt resistor spliced in series in the gray wire.

Resistor from any Radio Shack: part # 271-152

DPST switch from Digikey: 480-2081-ND (Not cheap or tiny, but very tough, light, and I think it looks cool).