Clipons

[DingleBerns]

I need some clipons for my 04 r6. I have morse ones on there now so something to that affect. PM me with info. Thanks.

[Lel399]

do you just need the bars or the actual clip on portion?

[DingleBerns]

I just need the bars. They are morse right now so I don't know if another brand would work, maybe.

[Lel399]

woodcraft, vortex and i think graves as well (as many others) replacement bars will fit, they are about $15 bucks each, you should always have at least 2 with you in the trailer

[DingleBerns]

cool thanks jason, does anyone have non bent ones for sale?

[hcr25]

you might want to take out one of those morse bars and look at it. the morse bars have notches in them where the bolts go through. vortex and woodcraft dont have those.

[cu260r6]

This is aircraft strength NO -seam aluminum that I use for spare clipon tubes. I bought 2 X 4' lengths of tube, and cut them down to 9". in the end you have tubes for under $5- a piece. I ordered 2 x 4 foot lengths instead of one 8 foot length so it can come via regular UPS and save $.

Go here:

http://www.aircraftspruce.com/

Alloy:
6062T6
Outside Diameter:
7/8
Wall:
.110
Part number:
03-36500
Length:
4
Quantity:
2

[DingleBerns]

Mike, they do, so does that mean I can only run morse?

[-puck-]

:idea: DB, why don't you just call Morse and see if he has any?

[Lel399]

Mike, they do, so does that mean I can only run morse?

doh i forgot about those... you need to grind some notches into whatever you use.


DB, why don't you just call Morse and see if he has any?

I think morse stopped making clipons almost 2 years ago

[DingleBerns]

:D So does anyone have some?

[bluedevil]

This is aircraft strength NO -seam aluminum that I use for spare clipon tubes. I bought 2 X 4' lengths of tube, and cut them down to 9". in the end you have tubes for under $5- a piece. I ordered 2 x 4 foot lengths instead of one 8 foot length so it can come via regular UPS and save $.

Go here:

http://www.aircraftspruce.com/

Alloy:
6062T6
Outside Diameter:
7/8
Wall:
.110
Part number:
03-36500
Length:
4
Quantity:
2


Interesting idea.... Are they stronger? One would assume so...

[cu260r6]

Dunno? B I assume they're at least the same strength as those are the same specs and material most clipon makers use.

[JOHNNYLAW]

My God, Berns!!!!!!!! Just go to Faster, and BUY SOME, they have a shelf full of them!!!!!!!!!!!! Then file the groove in them to fit the brackets!! ](*,)

[DingleBerns]

Thanks for the info smitty, I didn't know that.

[hcr25]

we don't have any of the Morse bars at Faster but since you list Morse as a sponsor why are you not calling them?

[DingleBerns]

I did, waiting for reply....

[bluedevil]

Just went down to Faster last week and got me a pile of them for spares.

Thanks guys!!!! 8)

[dragos13]

this is where i got mine:

http://www.1tail.com/sa/p/Woodcraft_Replacement_Bar_for_Clip-ons.htm

if you buy 6 or more they are only $11 each.